721TC - Parker Hydraulic Hose

Datasheets

Multispiral hydraulic hose for high pressure 

Features

  • No-skive hose construction
  • Reinforcement of four high tensile steel wires
  • Highly abrasion resistant tough cover
  • MSHA approved
  • Hose is suitable for temporary immersion in mineral oil up to 70 °C with frequent inspections

Primary applications

  • High-pressure extremely small bending radii applications.


Recommended fluids

  • Petroleum and water-glycol based fluids, lubricating oils,
    air and water. For air above 1.7 MPa, the hose cover
    must be pin-pricked.

Consult the chemical resistance table under documents.


Parker division HPDE
Temperature range -40 - 125 ° C
Hose construction 4 layers, Spiral, high tensile steel wire
Hose material type Rubber Hose
HoseDashMetricSizeType A - Standard (All - Except Transportaion and Refrigerant Hoses (SAE 100R5, SAE100R14, SAEJ51 & SAEJ2064))
Hose Cover Synthetic Rubber, High abrasion resistance, MSHA approved
Hose Inner Tube Synthetic Rubber
FittingSeries Series 71
Product Classification Hydraulics
Product Category Hoses
Product Group Rubber hose
Product Program High Pressure
Product Subprogram Standard
Hymatik number Supplier Item Number Availability
Working pressure
HoseSize
Unit price
Stock status
Favorite Sort Order
H00061901 721TC-20 Obsolete 21.0 MPa 1 1/4" | 31.5 mm | DN: 31 Not in stock 2147483647
H00061902 721TC-24 Obsolete 17.5 MPa 1 1/2" | 38 mm | DN: 38 Not in stock 2147483647
H00061903 721TC-32 Obsolete 17.5 MPa 2" | 51 mm | DN: 51 Not in stock 2147483647

Loading variant data