387 - Parker Hydraulic Hose
Hydraulic hose for high pressure
Features
- Standard cover.
- Half sae bend radius for ease of installation and low force to flex.
30% smaller o.d. by area compared to the sae spiral hose. - 3,000 psi constant working pressure in all sizes.
- Lighter than the standard sae spiral hose.
Primary applications
- General medium pressure hydraulic applications.
Recommended fluids
- Hydraulic fluids on a mineral-oil basis, water-glycol and
lubricating oils, air and water. - For air and gas applications with a pressure exceeding 1.7 MPa, the cover must be pin-pricked.
Consult the chemical resistance table under documents.
Parker division | HPDE |
---|---|
Temperature range | -40 - 100 ° C |
Hose construction | 1 or 2 layer(s), braid, steel wire (Four-spiral for sizes -20 up to -32) |
Hose material type | Rubber Hose |
HoseDashMetricSizeType | A - Standard (All - Except Transportaion and Refrigerant Hoses (SAE 100R5, SAE100R14, SAEJ51 & SAEJ2064)) |
Hose Classifications | DNV-GL (1), ABS (4), USCG (7), MSHA (8) |
Hose Cover | Synthetic Rubber |
Hose Inner Tube | Synthetic Rubber |
FittingSeries | Series 43, Series 48, (Selected), Series 77, (Selected) |
Product Classification | Hydraulics |
Product Category | Hoses |
Product Group | Rubber hose |
Product Program | Medium Pressure |
Product Subprogram | GlobalCore |
Catalogue
Loading variant data