487TC - Parker Hydraulic Hose
Hydraulic hose with tough cover for medium pressure
Features
- Globalcore - no-skive
- ½ ISO 18752 minimum bend radius
- Low force to flex for ease of installation
- 28 MPa constant working pressure
- Highly abrasion resistant
- MSHA approved
- Hose is suitable for temporary immersion in mineral oil up to 70 °C with frequent inspections
Primary applications
- General medium pressure hydraulic applications
Recommended fluids
- Hydraulic fluids on a mineral-oil basis, water-glycol and
lubricating oils, air and water. - For air and gas applications
with a pressure exceeding 1.7 MPa, the cover must be
pin-pricked.
Consult the chemical resistance table under documents.
Parker division | HPDE |
---|---|
Temperature range | -40 - 125 ° C |
Hose construction | 1 or 2 layer(s), braid, high-tensile steel wire (4 layers, spiral for sizes -16 up to -32) |
Hose material type | Rubber Hose |
HoseDashMetricSizeType | A - Standard (All - Except Transportaion and Refrigerant Hoses (SAE 100R5, SAE100R14, SAEJ51 & SAEJ2064)) |
Hose Classifications | DNV-GL (1), ABS (4), USCG (7), MSHA (8) |
Hose Cover | Synthetic Rubber, Highly abrasion resistance MSHA approved |
Hose Inner Tube | Synthetic Rubber |
FittingSeries | Series 43, Series 48, (Selected), Series 77, (Selected) |
Product Classification | Hydraulics |
Product Category | Hoses |
Product Group | Rubber hose |
Product Program | Medium Pressure |
Product Subprogram | GlobalCore |
Catalogue
Loading variant data